Language 
LED Screen on Stage, mainly used for auto shows, conferences, TV live broadcasts, stage backgrounds, ceremony weddings, conferences, exhibition halls,s and other occasions. Because they often participate in various indoor and outdoor activities, it is common for the screen body to be shipped. The tide seems to be the topic of a year and a month. So how do you properly keep the LED screen on stage? HTJ’s s after-sales technicians gave suggestions from the following three aspects, and hope to help customers:
One, during storage In the process of storage, first of all, we should pay attention to the storage standards indoors and outdoors, customers who have just purchased the screen can communicate with HTJ’s technical support department on how to better store. The following situations are to be avoided:
1. The screen should not be placed under the eaves where the rain will be wet.
2. Place the screen in the air box. Do not touch the bottom of the air box directly to the water.
3. The inside of the air box should be kept dry. There should be no water at the bottom of the air box. If it is already wet, it must be taken out to dry or blown dry with a fan.
4. When it encounters the southerly wind when it is wet and rainy, the wall is easy to condense, and the box that is taken out should not be placed against the wall to avoid the water drops on the wall.
5. The warehouse must be kept ventilated and dry, and the humid air should not be collected in the warehouse; it should be located in a higher place.
Two, in the process of use If the indoor products are used outdoors, in case of storms and storms, be sure to turn off the power immediately. If you don’t have time to dismantle the screen, use the tarpaulin prepared in advance to quickly cover the screen, and take the box out to dry after the rain. If it continues to rain, open the back cover of the cabinet and blow it dry with a fan. Then dry in a ventilated and dry room for more than 8 hours. The brightness is divided into five levels from low to high, and each brightness level is guaranteed to be illuminated for more than 4 hours, and the moisture in the electronic components is fully emitted. After loading the air box, place the activated carbon or desiccant to absorb the moisture in the air box. Even if the outdoor rental display screen is complicated and changeable, it is inevitable that the tank will enter the water. In addition to the above measures of indoor screen water intake, it is usually necessary to regularly check whether the waterproof ring of the box body is aging, deformed, and defective; whether the screw or the lock of the sealed box body is easy to lose and the pressure is insufficient.
Three, after use The normal LED Screen on the Stage body should be placed in the air box for storage after use. In the wet season, the air box should be wrapped with a film to cover the gap of the air box to prevent moisture from entering the package. The screen that has been put on hold for a long time, we should always electrify and maintain the power. Once the customer has stored the screen in the warehouse for half a year, the result is that there are many bad points when starting the use.
If you master the correct maintenance knowledge, you can avoid this. Class problem. The stage screen led is still a sophisticated electronic device. Regular power-on and moisture-proof should be used as a routine. If the large-area dead light is caused because the water is not processed in time, basically there is no value in repairing the light.
You need to contact the manufacturer to buy a batch of modules. In general, just as HTJ advocates the use of ex-ante management for quality control, good prevention habits can save a lot of unnecessary time and economic costs. The moisture-proof of rental display also needs to be pre-existing. The equipment leasing company strengthens the training on the use of the screen and the moisture-proof knowledge of the custodians so that the display can be in good working condition for a long time.
About HTJ LED DISPLAY Shenzhen HTJ Technology Co., LTD. is a company that manufactures Transparent LED displays, LED creative screens, Dance Floor LED Displays, LED ball displays, LED video displays, LED curved screens, stage LED displays, cylinder LED displays, street light pole advertising, LED Display Panels, other custom LED displays and other high-definition LED full-color screens. It is a professional China LED display manufacturer integrating R&D, production, sales, and service. The company is located near Shenzhen Baoan Airport, with a total area of 15,000 square meters, a production workshop of 10,000 square meters, and an office area of 2,000 square meters. With a large anti-static assembly line and SMD automatic surface mount equipment, wave soldering, and other technical equipment, the company relies on advanced management mode, strong technical research and development capabilities, and abundant raw material resources, and has carefully built a professional platform for modern enterprises.
